How to remove/wedge-vicks and m. tek armor?

Search for: A5E49
With Windhex you can go to: option>display offset as>SNES HiROM, this will make the 'C' appear on the left of the addresses, just to make it look like the event dump addresses to make it easier to match it up. But tt's fine without doing this though, just know that you do not need to include the first C in the address when doing a offset search. To sum this up, to get to address CA/5E72 via an offset search, input A5E72.

If it doesn't bring you to the right spot as shown (should be 7F 0E 20) than your ROM most likely has a header (200 extra bytes at the very start of the ROM), so you would need to add +200 to the address, which would be then A6072. You can remove the header if need be to make it easier.
But yes try searching A5E72 and see if it brings you to the right place.

I g2g here for a couple hours but I'll be back to help out more if needed, others can as well in my stead I'm sure.

EDIT: Meant to say address CA/6049 not CA/6072, but you get the idea.