Differences

This shows you the differences between two versions of the page.

--- ff3:ff3us:music:mmlcommands [2018/02/23 19:42]
madsiur
+++ ff3:ff3us:music:mmlcommands [2019/02/12 12:39]
@@ Line 1: / Line 1: @@
-===== MML Commands =====
-**Work in progress**
-|  **Command**  |  **Description**  |  **Example**  |  **FF6 Command**  |
-|  a,b,c,d,e,f,g  | Note | d1, g32 |  00-B5  |
-|  1,2,4,8,16,32,64  | 1/n note | a8, c16 |  0-B5  |
-|  +  | Sharp Note | a+8 |  |
-|  -  | Flat Note | a-8 |  |
-|  @xx  | Set Channel Instrument to xx | @16, @0x10 |  DC  |
-|  $  | Jump Command, the Channel will restart there when hitting ";" |  |  F6 xxxx  |
-|  oxx  | Set Octave to xx |  o5  |  D6 xx  |
-|  %xx  | Set Song Volume to xx |   |  F4 xx  |
-|  %bxx,yy  | Set Echo Feedback to yy over xx frames |   |  F7 xx yy  |
-|  %cxx  | Set Noise Clock to xx  |   |  CF xx  |
-|  %fxx,yy  | Set Filter |   |  F8 xx yy  |
-|  %kxx  | Set Transpose to xx |   |  D9 xx  |
-|  %vxx  | Set Song Echo Volume to xx |  %v28  |  F2 xx |
-|  %d1  | Enable Drum Roll |   |  E6  |
-|  %d0  | Disable Drum Roll |   |  E7  |
-|  %e1  | Enable Echo |   |  D4  |
-|  %e0  | Disable Echo |   |  D5  |
-|  %p1  | Enable Pitch Modulation |   |  D2  |
-|  %p0  | Disable Pitch Modulation |   |  D3  |
-|  kxx  | Add xx to Transpose |   |  DA xx  |
-|  m  | Disable Vibrato |   |  CA  |
-|  mxx,yy  | Change Pitch to yy with Envelope Duration xx |   |  C8 xx yy  |
-|  mxx,yy,zz  | Enable Vibrato with delay of xx, cycle duration of yy and amplitude of zz |   |  C9 xx yy zz  |
-|  p  | Disable pan sweep |  |  CE  |
-|  pxx  | Set Channel Pan to xx |  |  C6 xx |
-|  pxx,yy  | Set Channel Pan to xx with Envelope yy |  |  C7 xx yy |
-|  pxx,yy,zz  | Enable Pansweep with delay of yy and cycle duration of zz |  |  CD yy zz  |
-|  v  | Disable tremolo |   |  CC  |
-|  vxx  | Set channel volume to xx |  v127, v0x7F  |  C4 xx  |
-|  vxx,yy  | Set channel volume to yy with an envelope of xx |   |  C5 xx yy  |
-|  vxx,yy,zz  | Enable Tremolo with a delay of xx, cycle duration of yy and amplitude of zz |   |  CB xx yy zz  |
-|  r  | Rest. The length of the rest is specified in the same way as note length |  r8  |  B6-C3  |
-|  txx  | Set Tempo to xx bpm |  t30  |  F0 xx  |
-|  >  | Increment Octave |   |  D7  |
-|  <  | Decrement Octave |   |  D8  |
-|  l  | Apply length to a series of notes |  l8 gab  |   |
-|  ;  | End of channel |   |  EB  |
-|  [xx  | Loop start. Loop xx times |  [8a1]  |  E2 xx  |
-|  ]  | Loop end |  [8a1]  |  E3  |
-|  ^  | Sustained note or rest |  d1^8^  |   |
-|  .  | Sustain a note, as an example d1. equals d1^2, d1.. equals d1^2^4, etc. |  d1..  |   |
-|  ,  | Command argument separator (for 2 and more arguments) |   |   |