How to add a header to FF3 1.0 without SnesTool - Printable Version +- FF6 Hacking (https://www.ff6hacking.com/forums) +-- Forum: Discussion Forums (https://www.ff6hacking.com/forums/forum-5.html) +--- Forum: Magitek Research Facility (https://www.ff6hacking.com/forums/forum-9.html) +--- Thread: How to add a header to FF3 1.0 without SnesTool (/thread-2484.html) |
How to add a header to FF3 1.0 without SnesTool - mad6231 - 02-15-2014 I've been trying to located a site where I can download a copy of FF3 (US) version 1.0 with a header but after over an hour of searching with no luck I decided to try adding a header instead. The problem is I can't use snestool on my computer (windows 7, 64 bit) and I haven't been able to locate any other program capable of adding headers that will work with my computer. Has anyone else encountered this and come up with a solution? RE: How to add a header to FF3 1.0 without SnesTool - Gi Nattak - 02-15-2014 SNEStuff can add and remove the header and should work with Windows 7: http://www.smwcentral.net/?p=section&a=details&id=4613 RE: How to add a header to FF3 1.0 without SnesTool - JCE3000GT - 02-17-2014 This is fairly easy if you have access to a hex editor. I don't know Windows 7 64-bit but if you are able to run in 32-bit Windows XP compatibility mode download Hex Workshop and simply open your rom and go to the Edit menu then Insert (or press CTRL+INS) and put in 200 hexadecimal bytes with 00 as the filler byte then save. If this doesn't work then I cannot help you with a 64-bit Win7 operating system. RE: How to add a header to FF3 1.0 without SnesTool - mad6231 - 02-28-2014 Been a while since I logged on. About 10 minutes after posting this I managed to find a program that works, NRST3.4... Suffice to say I felt pretty stupid. RE: How to add a header to FF3 1.0 without SnesTool - SSJ Rick - 02-28-2014 since the problem is solved the thread is now closed |