Set party lead character - Events - Printable Version +- FF6 Hacking (https://www.ff6hacking.com/forums) +-- Forum: Discussion Forums (https://www.ff6hacking.com/forums/forum-5.html) +--- Forum: Magitek Research Facility (https://www.ff6hacking.com/forums/forum-9.html) +--- Thread: Set party lead character - Events (/thread-2810.html) |
Set party lead character - Events - Catone - 02-24-2015 First question: How do I change the lead party character? As in, I've done the check to see if the character is in the party, but how can I set that character as lead of party?(shown on screen) Second question: How do I go about taking a character from the current party, have them step out of the group, and do their own actions? Do I have to use a seperate npc, then remove that pc from the party? I can't remember an event that happens like this in either case (not saying its not done I just cant remember it) and the ones I thought did something along these lines look way to complicated for just setting the lead or making a character run off. Well, that does knida happen before sabin jumps off the water fall but I really dont remember any dialog there to find it either. RE: Set party lead character - Events - Synchysi - 02-25-2015 I did something similar to this in BNW (having all four characters spread out) and used some other event as a template, though for the life of me I can't remember which one. It might have been picking up Setzer's note in Owzer's house just before going to the Opera House. For a single character acting away from the party, you could check the event where Shadow leaves the party after beating AtmaWeapon. The dialogue nearby should be something to the effect of "I sold my skills to the Empire" I believe. Anyway, here's the logic behind how I did it: Code: Load caseword with characters in current party I can give you the raw bytes I used for the whole event as well if you need, though those shouldn't be too hard to find. I'm not sure if this actually changes the lead character to Jimbo - I'd have to check my test save, but it's on my laptop which I don't have handy at the moment. RE: Set party lead character - Events - Catone - 02-25-2015 Thanks for the info, those two events should cover what I was looking for. I had figured it was gonna take something like that, guess I had just hoped it didnt mean disbanding the party and rebuilding afterwards. Maybe what is throwing me off most is, well it seems like there is a ton of extra stuff in there. Alright lets see if I can explain this one. Subroutine at CA/C6AC spawns the full party,in a pile but all are shown. Subroutine at CA/C770 does something similar just without showing them all. Errr... well I think I understand the process well enough to make it happen. The issue at this point is, I'm trying to talk to a moving NPC. Meaning I don't know which direction to move the other party members because I can't be exact on where your starting the dialog at. So, I tried to cut the process down by not showing the other members, just setting (in this case Setzer) to slot 0 in the party, then show/refresh. Well, I managed to get it half working by using the first subroutine then setting party with characters 09,FF,FF,FF then hiding 32-34 leaving only Setzer showing. Actualy didnt have to rebuild the party proper after dialog which was a surprise but... problem? He insist on always facing away from the npc he should be talking to no matter where you start from. So, since simple and easy didnt work... will just have to go all the way, and take that frustration on poor old Setzer. He's gonna have to earn his prize now. RE: Set party lead character - Events - Synchysi - 02-25-2015 If you have room to expand the event a little, you could check the bits that determine which way you're facing when the event starts then force Setzer to face that way. Code: 1B0 B6:0 Facing up RE: Set party lead character - Events - Catone - 02-25-2015 ... Heh, lol... damn I really feel stupid now. I know those bits, I used them in the auction house. Then used them AFTER I rewrote this to fully spread the party out... and never once thought of using those bits with the first method involving only Setzer... wow... Anyway, that does fix the next issue I was about to run into, oh well back to plan A! Thanks for the help, again. RE: Set party lead character - Events - Tenkarider - 02-25-2015 Lol, usually plan A exists just for fail and make say: "ok, we got to go with Plan B " |